Jeep Bump Stop Pad Kit Front Universal Steel Bare GenRight

This is the GenRight Front Rock Stomper bump stop kit. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: This kit can be installed with our Urethane Bump Stops Or a King 2 inch air bump. This allows you to Upgrade down the road to true air bumps when you can afford it!
Features:

• Ideal for limiting up travel preventing damage from bottoming out
• Affordable and Complete kit
• Proven heavy duty construction
• Laser cut pieces key together for easy assembly
• 2 Zero degree, lower control arm mounts with built in bump stop pads on top 2.625 inches wide for a 9/16 inch bolt
• 2 Sets of gussets
• Includes axle side bump pads
• Welding Required
• Unpainted Finish
• Sold As A Kit

Important Notes:

• Bump Stops and Cans sold Separately.
• Requires cutting and welding to install this product.
• This product should be cycled Before use to confirm the bump stop is mounted in the correct position for your vehicle build to prevent unexpected damage out on the trail.
• Air bumps usually requires a Nitrogen charge of 75 to 120 lbs after installation.
• Will Not work with the Fox type air bumps cans!